EMC 69001166 manual Additional host Initiators, Group to

Windows Installation Checklists

Task		With Access Logix		Reference Document
12	Switch	For a SAN		Documentation that
	Zone switches	❑	Zone switches so that all desired paths exists between a server and the	ships with the switches
	additional paths		storage system.
	from server to		You will need to know the WWPN of the host initiators - available in the
	storage system
			switch’s name server table.
		❑ Checkpoint - Use switch management software to verify that the HBAs
			and storage system are logged in to the switch as fabric ports, and to verify
			that each HBA sees only the targets (SPs) to which it is zoned.
13	Storage System	❑	Use the Connectivity Status dialog in Navisphere Manager to register the	Navisphere Manager
	Register		additional host initiators with the storage system.	administrator’s guide
				and online help
	additional host
	initiators
14	Storage System	❑	Use Navisphere Manager to disconnect and then reconnect the server	Navisphere Manager
	ConnectStorage		from its Storage Group.	administrator’s guide
				and online help
	Group to		You can do this from the Host tab of the Storage Group Properties
	additional host		dialog.
		❑	Use the Disk Management tool to scan for disks.	Windows documentation
			If the disks are not visible, scan for them once more.
15	Server	❑	Use the Disk Management tool to scan for disks.	Windows documentation
	Make LUNs
	available to both
	SPs
16	Server	❑	Log into VERITAS Enterprise Administrator (VEA).	VERITAS Volume
	Verify DMP			Manager documentation
	installation	❑ Click the host name for the server.
		❑	Click disks.
		❑ Click a device that you know belongs to the CLARiiON storage system.
		❑	Click the paths tab for that device.	VERITAS Volume
				Manager documentation
		❑ Verify that the device has primary and secondary paths to it.
		❑ Verify the state of the device (enabled or disabled).

7-62

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems