EMC 69001166 manual Following Guide, To the switch port For a DS-xxB2 switch, both

				HP-UX Installation Checklist
Task		With Access Logix	Without Access Logix		Reference Document
8	Server	For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the		Storage-system setup
	Cable to switches	following:	following:		guide
	or storage system	• The left LED is green and the	• The left LED is green and the
	(cont.)	right LED is off, which indicates	right LED is off, which indicates
		that a 1-Gbit SP port is logged	that a 1-Gbit SP port is logged
		in to the switch port.	in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.
9	Switches	For a SAN	For a SAN		Switch management
	Zone	❑ Zone the switches to provide a	❑ Zone the switches to provide a		documentation
		path from each HBA port (host	path from each HBA port (host
		initiator) to the appropriate SPs.	initiator) to the appropriate SPs.
		❑ If SAN Copy, MirrorView, or
		MirrorView/A is installed, create
		any required zones.
		❑ Checkpoint - Use switch	❑ Checkpoint - Use switch
		management software to verify	management software to verify
		the switch connections to the	the switch connections to the
		storage system.	storage system.
			For a CX400, CX600, or
			FC4700-Series storage system, go to
			step 11; for an FC4500 storage
			system, go to step 13.

PowerPath Checklist - New HP-UX Server and Existing Storage System

2-17