EMC 69001166 manual Cable to data, Ports to Fibre, Or server HBA Ports, NIC ports

Windows Installation Checklists

Task		With Access Logix	Reference Document
9	CX300, CX500, or	❑ Cable storage-system data ports either to the Fibre Channel switch	Storage-system setup
	CX700 Storage	connected to the server HBA ports or directly to the server HBA ports.	guide or storage-system
	System		setup guide
	Cable to data	❑ Checkpoint - For a SAN, verify the HBA connections to the Fibre Channel
	ports to Fibre
		switch by checking the LED(s) for the switch port connected to each HBA
	Channel switch
		port.
	or server HBA
	ports	For a 1-Gbit switch - LED is green, which indicates that the HBA port is
		logged in to the switch port.
		For a 2-Gbit switch - One of the following:
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
		Go to step 13.
10	CX500i Storage	❑ Cable the storage-system iSCSI data ports either or to the network	Storage-system setup
	System	connected to the server HBA or NIC ports or directly to the server HBA or	guide
	Cable to data	NICs ports.
	ports to network,	❑ Checkpoint - For a network connection with the server, verify the	Switch documentation
	or server HBA or
	NIC ports	storage-system connections to the network router or switch by checking
		the LED(s) for the router or switch port connected to each SP port.
11	CX500i Storage	❑ Use Navisphere Manager to configure network parameters for the	Storage-system setup
	System	storage-system iSCSI data ports.	guide
	Configure iSCSi
	storage-system
	data ports
12	Server With	For NICs	Microsoft documentation
	CX500i Storage	❑ Use Microsoft iSCSI Software Initiator on the server to configure the iSCSI
	System	initiators for each NIC port.
	Configure any
	additional server	For iSCSI HBAs	QLogix SANsurfer
	iSCSI initiator	❑ Use QLogic SANsurfer to configure the network parameters for each or for	documentation
	ports	each HBA.
13	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if	Navisphere security
	Set up security	not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help

7-40

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems