EMC 69001166 manual Novell NetWare operating system

NetWare Installation Checklists

◆ You must have planned your LUNs and RAID Groups, and Storage Groups if you have Access Logix. Be sure to consider requirements for SAN Copy, SnapView, MirrorView, and MirrorView/A if you have this software. The following documents will help you with this planning:

	•	EMC Fibre Channel Storage System CX200-Series Configuration
		Planning Guide (P/N 014003115)
	•	EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage
		Systems Configuration Planning Guide (P/N 300-001-273)
	•	EMC CX400-Series and CX600-Series Storage Systems
		Configuration Planning Guide (P/N 014003113)
	•	EMC Fibre Channel Storage System Model FC4700-2
		Configuration Planning Guide (P/N 014003087)
	•	EMC Fibre Channel Storage System Model FC4500, FC5300, and
		FC5700 Configuration Planning Guide (P/N 014003039)
Documentation	Each checklist refers to some or all of the documents listed below. We
	recommend that you load these documents on your service laptop or,
	for an FC4500 or FC4700, on the computer you will connect to the
	storage system, before starting the installation.
	◆ Documentation that ships with
	•	HBA and HBA driver
		This documentation is also available from the following QLogic
		website:
		http://www.qlogic.com/support/drivers_software.asp
		and select EMC in the OEM-approved Drivers/Firmware list at the
		bottom of the page.
	•	Switches and switch management software
	•	Novell NetWare operating system

◆ Removing ATF or CDE Software Before Installing Other Failover Software (P/N 069001173)

◆ PowerPath Version 3.0 Product Guide (P/N 300-000-047)

◆ PowerPath Version 3.0 Installation and Administration Guide for NetWare (P/N 300-000-513)

4-4

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems