EMC 69001166 manual That you will connect to the SP management ports

Windows Installation Checklists

Prerequisites	◆ You must have a host that is
	•	Running an operating system that can support the Navisphere
		Manager 6.X browser-based client. For an up-to-date list of
		such operating systems, refer to the Navisphere Manager 6.X
		release notes on http://powerlink.emc.com.
	•	On a network that is connected to the storage-system server
		and that you will connect to the SP management ports in the
		storage system.
	◆ For most configurations, you must also have a host that is
	•	Running Navisphere 6.X CLI
	•	On a network that is connected to the storage-system server
		and that you will connect to SP management ports in the
		storage system.
	◆ For an FC4500 storage system connected to a server on which you
	will install PowerPath, you must have a computer that you can
	connect to the storage system. This computer must run
	•	Windows 2000
	•	Navisphere Host Agent and CLI version 6.1 or higher
	◆ You must have planned your LUNs and RAID Groups, and
	Storage Groups if you have Access Logix. Be sure to consider
	requirements for SAN Copy, SnapView, MirrorView, and
	MirrorView/A if you have this software. The following
	documents will help you with this planning:
	•	EMC Fibre Channel Storage System CX200-Series Configuration
		Planning Guide (P/N 014003115)
	•	EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage
		Systems Configuration Planning Guide (P/N 300-001-273)
	•	EMC CX400-Series and CX600-Series Storage Systems
		Configuration Planning Guide (P/N 014003113)
	•	EMC Fibre Channel Storage System Model FC4700-2
		Configuration Planning Guide (P/N 014003087)
	•	EMC Fibre Channel Storage System Model FC4500, FC5300, and
		FC5700 Configuration Planning Guide (P/N 014003039)

7-4

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems