EMC 69001166 manual Ports initiators Navicli -np -d device, Other cases Where Device is the name

Solaris Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
7 FC4500 Storage	For existing HBAs		Navisphere CLI
System	An existing HBA is one that is		reference
Set properties for
	registered with the storage system.
PowerPath (cont.)	❑ From the computer connected to
	the storage system’s serial port,
	use the following Navisphere CLI
	commands to set the following
	storage-system properties for the
	server’s existing HBA existing
	ports (initiators):
	navicli -np -d device
	storagegroup -sethost -host
	servername -type 3
	navicli -np -d device
	storagegroup -sethost -host
	servername -failovermode 1
	navicli -np -d device
	storagegroup -sethost -host
	servername -arraycommpath 1
	navicli -np -d device
	unitserialnumber lun (only for
	server in a Sun Cluster; it must
	left at the default setting for all
	other cases)
	where
	device is the name of the
	computer port connected to the
	storage-system serial port (for
	example, com1).
	servername is the name of the
	server with the HBAs.

5-38

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems