EMC 69001166 manual FC4500 Storage, For a server with any HBAs System

			HP-UX Installation Checklist
Task	With Access Logix	Without Access Logix		Reference Document
8 FC4500 Storage	For a server with registered HBAs	For a server with any HBAs
System	Perform this task either
Set properties for		Perform this task either
	• across the LAN connected to the
PowerPath		• from an attached host or a host
	Navisphere portal for the storage
	system, or	networked to an attached host, or
	• from an attached host or a host	• from a laptop connected to a
	networked to an attached host, or	storage-system serial port, as
	• from a laptop connected to a	described in the storage-system
		setup guide.
	storage-system serial port, as
	described in the storage-system
	setup guide.
	Across LAN			Navisphere Manager
	❑ Use Navisphere Manager’s			administrator’s guide
				and online help
	Failover Setup Wizard (selected
	from the Tools menu on the
	toolbar) to set the following
	storage-system properties for the
	server’s existing HBA ports
	(initiators):
	Failover mode to 1
	Array commpath to Enabled
	From an attached host or networked	From an attached or networked host		Navisphere CLI
	host	❑ Use the following Navisphere CLI		reference
	❑ Use the following Navisphere CLI
		commands to set the following
	commands to set the following	default storage-system properties:
	storage-system properties for the	navicli -ddevice -hhostname
	server’s existing HBA existing
		failovermode 1
	ports (initiators):
		navicli -ddevice -hhostname
	navicli -ddevice -hhostname
		arraycommpath 1
	storagegroup -sethost
	-failovermode 1	where
	navicli -ddevice -hhostname	device is the storage system’s
		name
	storagegroup -sethost
		hostname is the server’s name or
	-arraycommpath 1
	where	network address.
	device is the storage system’s
	name
	hostname is the server’s name or
	network address.

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

2-37