EMC 69001166 manual Device is the name Navicli -np -d device, Example, com1 Navicli -np -d device

NetWare Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
10 Storage System	For an FC4500 storage system	For an FC4500 storage system	Storage-system setup
Set Properties	❑ Connect a computer to the serial	❑ Connect a computer to the serial	guide
for PowerPath	port on the storage system.	port on the storage system
(cont.)
	❑ From the computer connected to	❑ From the computer connected to	Navisphere CLI
	the storage system’s serial port,	the storage system’s serial port,	reference
	use the following Navisphere CLI	use the following Navisphere CLI
	commands to set the following	command to determine the
	storage-system properties for the	default storage-system type:
	server’s HBA ports (initiators):	navicli -np -d device
	navicli -np -d device	systemtype
	storagegroup -sethost -host	where
	servername -type 3
		device is the name of the
	navicli -np -d device
		computer port connected to the
	storagegroup -sethost -host
		storage-system serial port (for
	servername -failovermode 1
		example, com1).
	navicli -np -d device	If the default storage-system
	storagegroup -sethost -host
		system type is not 3 (CLARiiON
	servername -arraycommpath 1
		Open), use the following
	where	Navisphere CLI command to set
	device is the name of the	it to 3:
		navicli -np -d device
	computer port connected to the
	storage-system serial port (for	systemtype -config 3
	example, com1).	CAUTION The above command
	servername is the name of the
		reboots both SPs at the same
	server with the HBAs.	time.
		❑ From the computer connected to
		the storage system’s serial port,
		use the following Navisphere CLI
		commands to set the following
		default storage-system
		properties:
		navicli -np -d device
		failovermode 1
		navicli -np -d device
		arraycommpath 1
		where device is the name of the
		computer port connected to the
		storage-system serial port (for
		example, com1).

4-16

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems