EMC 69001166 manual Install PowerPath PowerPath release, From the server to each SP

						Windows Installation Checklists
Task		With Access Logix		Without Access Logix			Reference Document
14	Server	❑	Install PowerPath.	❑	Install PowerPath.		PowerPath release
	Install PowerPath	❑ Reboot the server to complete		❑ Reboot the server to complete			notes and PowerPath for
							Windows installation
			the installation of PowerPath.		the installation of PowerPath.		and administrator’s
			Contrary to what the PowerPath		Contrary to what the PowerPath		guide
			documentation states, PowerPath		documentation states, PowerPath
			will not see any logical disks		will not see any logical disks
			(LUNs) in the storage system at		(LUNs) in the storage system at
			this point because the storage		this point because the storage
			system has not been connected.		system has not been connected.
		❑ Install any PowerPath patches		❑ Install any PowerPath patches
			from the Software downloads		from the Software downloads
			page on the EMC Powerlink		page on the EMC Powerlink
			website:		website:
			http://powerlink.emc.com		http://powerlink.emc.com
15	Fibre Channel	❑ Zone the Fibre Channel switches		❑ Zone the FIbre Channel switches			Switch management
	Switches		to provide an additional paths		to provide an additional paths		documentation
	Zone additional		from the server to each SP.		from the server to each SP.
	paths	❑ If SAN Copy, MirrorView, or
			MirrorView/A is installed, create
			any required zones.
		❑	Checkpoint - Use switch	❑	Checkpoint - Use switch
			management software to verify		management software to verify
			the switch connections to the		the switch connections to the
			storage system.		storage system

PowerPath Checklist — New Windows Server and Existing Storage System With Boot Disk

7-31