AIX Installation Checklists

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Task

With Access Logix

Without Access Logix

Reference Document

 

 

 

 

 

 

 

 

 

 

14 Server

Execute the following command:

Execute the following command:

AIX documentation

 

 

Configure

 

emc_cfgmgr.sh

 

emc_cfgmgr.sh

 

 

 

devices

 

 

 

 

 

 

 

 

 

Execute the following PowerPath

Execute the following PowerPath

PowerPath product

 

 

 

 

command:

 

command:

guide

 

 

 

 

powermt config

 

powermt config

 

 

 

 

Checkpoint - Verify that the

Checkpoint - Verify that the

AIX documentation

 

 

 

 

servers see hdisk devices for the

 

servers see hdisk devices for the

 

 

 

 

 

LUNs.

 

LUNs.

 

 

 

 

Checkpoint - Verify that

Checkpoint - Verify that

PowerPath product

 

 

 

 

PowerPath sees all the paths to

 

PowerPath sees all the paths to

guide

 

 

 

 

the LUNs with the following

 

the LUNs with the following

 

 

 

 

 

PowerPath command:

 

PowerPath command:

 

 

 

 

 

powermt display dev=all

 

powermt display dev=all

 

 

 

 

 

class=clariion

 

class=clariion

 

 

 

 

 

If PowerPath does not see the

 

If PowerPath does not see the

 

 

 

 

 

LUNs

 

LUNs

 

 

 

 

 

• Verify the server’s connection

 

• Verify that you registered your

 

 

 

 

 

to the Storage Group.

 

PowerPath license key if you

 

 

 

 

 

• Verify that you registered your

 

have one.

 

 

 

 

 

 

 

 

 

 

 

 

 

PowerPath license key if you

 

• Verify that the storage-system

 

 

 

 

 

have one.

 

properties are as defined in

 

 

 

 

 

• Verify that the storage-system

 

step 8.

 

 

 

 

 

 

 

 

 

 

 

 

 

properties are as defined in

 

 

 

 

 

 

 

 

step 8.

 

 

 

 

 

 

 

Restart the Navisphere Host

Restart the Navisphere Host

CX-Series Server

 

 

 

 

Agent or run the Navisphere

 

Agent or run the Navisphere

Software for AIX

 

 

 

 

Server Utility with the following

 

Server Utility with the following

Installation Guide

 

 

 

 

AIX commands:

 

AIX commands:

 

 

 

 

 

Host Agent/

 

Host Agent/

 

 

 

 

 

etc/rc.agent stop

 

etc/rc.agent stop

 

 

 

 

 

/etc/rc.agent start

 

/etc/rc.agent start

 

 

 

 

 

Server Utility

 

Server Utility

 

 

 

 

 

/usr/lpp/HOSTUTIL/naviserverutil

 

/usr/lpp/HOSTUTIL/naviserverutil

 

 

 

 

Checkpoint if the Host Agent is

Checkpoint if the Host Agent is

Navisphere Manager

 

 

 

 

installed - Use Navisphere

 

installed - Use Navisphere

administrator’s guide

 

 

 

 

Manager to verify that the LUNs

 

Manager to verify that the LUNs

and online help

 

 

 

 

are mapped to hdiskpower

 

are mapped to hdiskpower

 

 

 

 

 

devices.

 

devices.

 

 

 

 

 

 

 

 

 

 

 

PowerPath Checklist — New AIX Server and Existing Storage System

1-19

Page 29
Image 29
EMC 69001166 Checkpoint Verify that AIX documentation, LUNs Checkpoint Verify that PowerPath product, To the Storage Group