EMC 69001166 manual ISCSI initiator, Paths, Install optional

Windows Installation Checklists

Task		With Access Logix	Reference Document
13	Server With	For NICs	Storage-system setup
	CX500i Storage	❑ Use Microsoft iSCSI Software Initiator on the server to configure the iSCSI	guide
	System	initiators for each NIC port.
	Configure server
	iSCSI initiator	For iSCSI HBAs
	ports	❑ Use QLogic SANsurfer to configure the network parameters for each HBA
		port.
14	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if	Navisphere security
	Set up security	not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help
15	Storage System	❑ Use the following Navisphere CLI commands to set the following default	Navisphere CLI
	Set Properties for	storage-system properties:	reference
	PowerPath	navicli -h hostname systemtype -config 3
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the storage
		system.
16	FIbre Channel	For a Fibre Channel SAN	Fibre Channel switch
	Switches	❑ Zone the Fibre Channel switches to provide a path from each HBA port	management
	Zone additional		documentation
		(host initiator) to the appropriate SPs.
	paths
		❑ If SAN Copy, MirrorView, or MirrorView/A is installed, create any required
		zones.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.
17	Server	❑ Restart the Host Agent or run the Navisphere Server Utility, then use the	Storage-system setup
	Make target SPs	Disk Management tool to scan for disks.	guide and Windows
			documentation
	available	If the disks are not visible, scan for them once more.
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box to	Navisphere Manager
		verify that each HBA or NIC is registered with the storage system.	administrator’s guide
			and online help
18	Storage System	❑ If you have optional SAN Copy, SnapView, MirrorView/A, and/or MirrorView	Storage-system setup
	Install optional	/S software that you ordered, install its enabler.	guide and Navisphere
			Manager administrator’s
	software
			guide and online help

7-10

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems