EMC 69001166 manual Guide PowerPath command, Configuration, Powermt -save, This command creates

				NetWare Installation Checklists
Task		With Access Logix	Without Access Logix		Reference Document
15	Server	❑ Save the server’s PowerPath	❑ Save the server’s PowerPath		PowerPath product
	Save PowerPath	configuration with the following	configuration with the following		guide
		PowerPath command:	PowerPath command:
	configuration
		powermt -save	powermt -save
		This command creates the	This command creates the
		powermt.ctm configuration file.	powermt.ctm configuration file.
16	Server	If you have a PowerPath license key	If you have a PowerPath license key		NetWare documentation
	Test PowerPath	If your PowerPath license key is not	If your PowerPath license key is not
	with a license	registered, the load balancing policy is	registered, the load balancing policy is
	key	restricted to basic failover.	restricted to basic failover.
		❑ Stop all applications accessing	❑ Stop all applications accessing
		the storage system and disable	the storage system and disable
		user logins to the server.	user logins to the server.
		❑ View the LUNs available to the	❑ View the LUNs available to the		PowerPath product
		server using the following	server using the following		guide
		PowerPath command:	PowerPath command:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		❑ Choose one available LUN to	❑ Choose one available LUN to
		receive I/O for the test.	receive I/O for the test.
		❑ View the paths to the chosen	❑ View the paths to the chosen
		LUN using the following	LUN using the following
		PowerPath command:	PowerPath command:
		powermt display dev=x every=2	powermt display dev=x every=2
		where x is a pseudo device that	where x is a pseudo device that
		represents the chosen LUN.	represents the chosen LUN.
		❑ Start I/O to the LUN.	❑ Start I/O to the LUN.
		❑ Identify the HBA sending I/O to	❑ Identify the HBA sending I/O to
		LUN by viewing the output of the	LUN by viewing the output of the
		powermt display dev=x every=2	powermt display dev=x every=2
		command, and disconnect the	command, and disconnect the
		cable to that HBA.	cable to that HBA.

PowerPath Checklist — New NetWare Server and Existing Storage System

4-19