EMC 69001166 manual Monitor

HP-UX Installation Checklist

Task		With Access Logix	Reference Document
13	Server	❑ Log in as root and restart the Navisphere Host Agent with the following	CX-Series Server
	Make target SPs	HP-UX commands:	Software for HP-UX
			Installation Guide
	available (cont.)	/sbin/init.d/agent stop
		/sbin/init.d/agent start
		❑ Make sure again that each HBA sees only the targets (SPs) to which it is	HP-UX documentation
		zoned with the following HP-UX commands:
		ioscan -fnC disk
		insf -e
		❑ Reverify that HP-UX sees device entries for all LUNS with the following
		HP-UX command:
		ioscan -fnC disk
14	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure		administrator’s guide
			and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group.
15	Server	❑ Log in as root and restart the Navisphere Host Agent with the following	CX-Series Server
	Make LUNs visible	HP-UX commands:	Software for HP-UX
			Installation Guide
		/sbin/init.d/agent stop
		/sbin/init.d/agent start
		❑ Checkpoint - Verify that HP-UX can recognize these LUNs with the	HP-UX documentation
		following HP-UX commands:
		ioscan -fnC disk
		insf -e
		ioscan -fnC disk
		If HP-UX does not recognize any LUNs, verify the connection to the
		Storage Group.
16	Storage System	❑ Plan your monitoring configuration.	Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up	administrator’s guide
			and online help
	Monitor
		your monitoring configuration.

2-10

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems