EMC 69001166 manual For a 2-Gigabit switch One

Solaris Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
7 Server	❑ Cable the HBA ports to the switch	❑ Cable the HBA ports to the switch	Storage-system setup
Cable to	connected to the storage system	connected to the storage system	guide.
	or to SP ports.	or to SP ports.
switches or
storage system	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify
	the HBA connection to the switch	the HBA connection to the switch
	by checking the LED(s) for the	by checking the LED(s) for the
	switch port connected to the HBA	switch port connected to the HBA
	port.	port.
	For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
	green, which indicates that the	green, which indicates that the
	HBA is logged in to the switch	HBA is logged in to the switch
	port.	port.
	For a 2-Gigabit switch - One of	For a 2-Gigabit switch - One of
	the following:	the following:
	• The left LED is green and the	• The left LED is green and the
	right LED is off, which indicates	right LED is off, which indicates
	that a 1-Gbit SP port is logged	that a 1-Gbit SP port is logged
	in to the switch port.	in to the switch port.
	• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
	LEDs are green, which	LEDs are green, which
	indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
	port is logged in to the switch	port is logged in to the switch
	port.	port.
	• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
	LED is blue and the right LED	LED is blue and the right LED
	is off, which indicates that a	is off, which indicates that a
	2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
	the switch port.	the switch port.

5-16

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems