EMC 69001166 manual Required zones, Bindings, Register, With storage

			Linux Installation Checklist
Task		With Access Logix	Reference Document
9	Server	❑ Cable any additional HBA ports to the switch connected to the storage	Storage-system setup
	Cable additional	system or to SP ports.	guide.
	HBAs to switches	❑ Checkpoint - For a SAN, verify the HBA connections to the switch by
	or storage	checking the LED(s) for the switch port connected to each additional HBA
	system
		port.
		For a 1-Gbit switch - LED is green, which indicates that the HBA port is
		logged in to the switch port.
		For a 2-Gbit switch - One of the following:
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
10	Switches	For a SAN	Switch management
	Zone	❑ Zone the switches to provide a path from each additional HBA port (host	documentation
		initiator) to the SPs.
		❑ If SAN Copy, MirrorView, and/or MirrorView/A is installed, create any
		required zones.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.
11	Server	❑ Add persistent bindings to the HBA driver configuration file.	HBA documentation
	Add Persistent	Note: You need the WWPN of each SP port for the bindings.	(see URL on page 3-4)
	Bindings
12	Server	❑ To make LUNZs visible to the HBAs, either reload the HBA driver or reboot	Linux documentation
	Register	the server.
	additional HBAs	Note: LUNZs are required to register the server HBAs with the storage
	with storage	system because LUNs have not be configured yet.
	system
		❑ If you reloaded the HBA driver, restart the Navisphere Host Agent or run	CX-Series Server
		the Navisphere Server Utility.	Software for Linux
			Installation Guide
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
		to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help

PowerPath Checklist — Existing Linux Server and New Storage System

3-25