EMC 69001166 manual Host servername

HP-UX Installation Checklist

Task	With Access Logix	Without Access Logix	Reference Document
7 CX300, CX400,	From an attached or networked host or	From an attached or networked host or	Navisphere CLI
CX500, CX600,	laptop	laptop	reference
CX700, or	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI
FC4700-Series
	commands to set the following	commands to set the following
Storage System
	storage-system properties for the	storage-system properties:
Set properties for
	server’s existing HBA existing	navicli -h hostname
PowerPath	ports (initiators):
		failovermode 1
(cont.)	navicli -h hostname
		navicli -h hostname
	storagegroup -sethost
		arraycommpath 1
	-hostservername
	-failovermode 1	where
	navicli -h hostname	hostname is the IP address or
		network name of an SP in the
	storagegroup -setpath
		storage system.
	-hostservername
	-arraycommpath 1	Go to step 9.
	where
	hostname is the IP address or
	network name of an SP in the
	storage system
	servername is the server’s name
	or network address
	For a server with unregistered HBAs
	Perform this task either
	• from an attached host or a host
	networked to an attached host, or
	• from a laptop connected to the
	storage system, as described in the
	storage-system initialization or
	setup guide.
	❑ Use the following Navisphere CLI
	commands to set the following
	default storage-system properties:
	navicli -h hostname
	failovermode 1
	navicli -h hostname
	arraycommpath 1
	where hostname is the IP address
	or network name of an SP in the
	storage system.
	Go step 9.

2-36

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems