EMC 69001166 manual Navisphere CLI CX500, CX600 Laptop Reference CX700, or, Setup guide Across LAN

				HP-UX Installation Checklist
Task		With Access Logix	Without Access Logix		Reference Document
12	CX300, CX400,	From an attached or networked host or	From an attached or networked host or		Navisphere CLI
	CX500, CX600,	laptop	laptop		reference
	CX700, or	❑ Use the following Navisphere CLI	❑ Use following Navisphere CLI
	FC4700-Series
	Storage System	commands to set the following	commands to set the following
		storage-system properties for the	default storage-system properties:
	Set properties for
		server’s existing HBA existing	navicli -h hostname
	PowerPath (cont.)	ports (initiators):
			failovermode 1
		navicli -h hostname
			navicli -h hostname
		storagegroup -sethost
			arraycommpath 1
		-hostservername
		-failovermode 1	where
		navicli -h hostname	hostname is the IP address or
			network name of an SP in the
		storagegroup -setpath
			storage system.
		-hostservername
		-arraycommpath 1	Go to step 14.
		where
		hostname is the IP address or
		network name of an SP in the
		storage system
		servername is the server’s name
		or network address
		Go to step 14.
13	FC4500 Storage	Perform this task either	Perform this task either
	System	• across the LAN connected to the	• from an attached host or a host
	Set properties for	Navisphere portal for the storage	networked to an attached host, or
	PowerPath	system, or	• from a laptop connected to a
		• from an attached host or a host	storage-system serial port, as
		networked to an attached host, or	described in the storage-system
		• from a laptop connected to a	setup guide.
		storage-system serial port, as
		described in the storage-system
		setup guide.
		Across LAN			Navisphere Manager
		❑ Use Navisphere Manager’s			administrator’s guide
					and online help
		Failover Setup Wizard (selected
		from the Tools menu on the
		toolbar) to set the following
		storage-system properties for the
		server’s existing HBA ports
		(initiators):
		Failover mode to 1
		Array commpath to Enabled

PowerPath Checklist - New HP-UX Server and Existing Storage System

2-19