EMC 69001166 manual Storage-system type Navicli -np -d device

NetWare Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
8 FC4500 Storage	❑ Connect a computer to the serial	❑ Connect a computer to the serial	Storage-system setup
System	port on the storage system.	port on the storage system.	guide
Set properties for	For new HBAs	For any HBAs	Navisphere CLI
PowerPath			reference
	❑ From the computer connected to	❑ From the computer connected to
	the storage system’s serial port,	the storage system’s serial port,
	use the following Navisphere CLI	use the following Navisphere CLI
	command to determine the	command to determine the default
	default storage-system type:	storage-system type:
	navicli -np -d device	navicli -np -d device systemtype
	systemtype	where device is the name of the
	where device is the name of the
		computer port connected to the
	computer port connected to the	storage-system serial port (for
	storage-system serial port (for	example, com1).
	example, com1).	If the default storage-system
	If the default storage-system	system type is not 3 (CLARiiON
	system type is not 3 (CLARiiON	Open), use the following
	Open), use the following	Navisphere CLI command to set it
	Navisphere CLI command to set	to 3:
	it to 3:	navicli -np -d device systemtype
	navicli -np -d device	-config 3
	systemtype -config 3	CAUTION The above command reboots
	CAUTION The above command
		both SPs at the same time.
	reboots both SPs at the same
	time.
	❑ From the computer connected to	❑ From the computer connected to
	the storage system’s serial port,	the storage system’s serial port,
	use the following Navisphere CLI	use the following Navisphere CLI
	commands to set the following	commands to set the following
	default storage-system	default storage-system properties:
	properties:	navicli -np -d device
	navicli -np -d device	failovermode 1
	failovermode 1	navicli -np -d device
	navicli -np -d device	arraycommpath 1
	arraycommpath 1	where device is the name of the
	where device is the name of the
		computer port connected to the
	computer port connected to the	storage-system serial port (for
	storage-system serial port (for	example, com1).
	example, com1).

4-32

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems