EMC 69001166 manual Command Guide, For the LUNs Checkpoint Verify that PowerPath product

AIX Installation Checklists

Task	With Access Logix		Without Access Logix		Reference Document
14 Server	❑	If you replaced HBAs or added			Navisphere Manager
Configure		additional HBAs, use Navisphere			administrator’s guide
		Manager to disconnect and then			and online help
devices
		reconnect the server and its
		Storage Group.
	❑ Execute the following command:		❑ Execute the following command:		AIX documentation
		emc_cfgmgr.sh		emc_cfgmgr.sh
	❑ Execute the following PowerPath		❑ Execute the following PowerPath		PowerPath product
		command:		command:	guide
		powermt config		powermt config
	❑	Checkpoint - Verify that the	❑	Checkpoint - Verify that the
		server sees hdiskpower devices		server sees hdiskpower devices
		for the LUNs.		for the LUNs.
	❑	Checkpoint - Verify that	❑	Checkpoint - Verify that	PowerPath product
		PowerPath sees all the paths to		PowerPath sees all the paths to	guide
		the LUNs with the following		the LUNs with the following
		PowerPath command:		PowerPath command:
		powermt display dev=all		powermt display dev=all
		class=clariion		class=clariion
		If PowerPath does not see the		If PowerPath does not see the
		LUNs		LUNs
		• Verify the server’s connection		• Verify that you registered your
		to the Storage Group.		PowerPath license key if you
		• Verify that you registered your		have one.
		PowerPath license key if you		• Verify that the storage-system
		have one.		properties are as defined in
		• Verify that the storage-system		step 9.
		properties are as defined in
		step 9.

1-38

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems