EMC 69001166 manual Recognizes the LUNs, Templates to the storage system

Solaris Installation Checklists

Task		With Access Logix	Reference Document
13	Server	❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
	Make target SPs	to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help
	available (cont.)
14	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure		administrator’s guide
			and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
		❑ Reboot the server using the reboot - - -rcommand so that Solaris	Solaris documentation
		recognizes the LUNs.
		Now the LUNs in the Storage Group look like any other disks in the server.
		❑ Checkpoint - Use the format command to verify that Solaris recognizes	Solaris documentation
		the LUNs.
		If Solaris does not recognize any LUNs, verify the server’s connection to
		the Storage Group.
15	Storage System	❑ If you will monitor storage-system events, apply the desired event monitor	Navisphere Manager
	Set up Event	templates to the storage system.	administrator’s guide
			and online help
	Monitor
16	Server	❑ Prepare the LUNs to receive data by	Solaris host
	Make LUNs	• Specifying Solaris mount point names for them	connectivity guide or
			Solaris documentation
	available to	• Labeling and partitioning them
	Solaris
		• Mounting file systems on them
		• Mounting them to the mount points
17	Server	❑ Use the following PowerPath commands to configure PowerPath for any	PowerPath product
	Configure	missing logical devices so all paths to LUNs are visible:	guide
	PowerPath for	powercf -i or powercf -q
	missing devices	powermt config
		❑ Checkpoint - Use the following PowerPath command to verify that
		PowerPath sees all the paths to the LUNs:
		powermt display dev=all class=clariion
		If PowerPath cannot see all the paths, verify that
		• You registered your PowerPath license key.
		• The storage-system properties are set as defined in step 10.

PowerPath Checklist — Existing Solaris Server and New Storage System

5-29