EMC 69001166 manual Server, Each LUN with the following Documentation NetWare command

NetWare Installation Checklists

Task		With Access Logix		Without Access Logix	Reference Document
13	Server	❑ Use Navisphere Manager to		N/A	Navisphere Manager
	Make LUNs		disconnect and then reconnect		administrator’s guide
			the server and its Storage Group.		and online help
	available to
	additional HBAs	❑	Reboot the server
14	Server	❑ Checkpoint - Verify the paths to		❑ Checkpoint - Verify the paths to	NetWare
	Verify paths to		each LUN with the following	each LUN with the following	documentation
			NetWare command:	NetWare command:
	storage system
			list devices	list devices
		❑	Checkpoint - Verify that	❑ Checkpoint - Verify that	PowerPath product
			PowerPath sees the paths to	PowerPath sees the paths to each	guide
			each LUN using the following	LUN using the following PowerPath
			PowerPath command:	command:
			powermt display dev=all	powermt display dev=all
			class=clariion	class=clariion
			If PowerPath does not see the	If PowerPath does not see the
			LUNs	LUNs
			• Verify the server’s connection	• Verify that you registered your
			to the Storage Group.	PowerPath license key if you
			• Verify that you registered your	have one.
			PowerPath license key if you	• Verify that the storage-system
			have one.	properties are as defined in step
			• Verify that the storage-system	7 or 8
			properties are as defined in
			step 7 or 8.
		For an FC4500 storage system		For an FC4500 storage system	Storage-system setup
		❑ Disconnect the computer from		❑ Disconnect the computer from the	guide
			the serial port on the storage	serial port on the storage system.
			system.

4-36

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems