EMC 69001166 Reboot the server so Windows recognizes the LUNs, All the paths to the LUNs Guide

Windows Installation Checklists

Task		With Access Logix	Reference Document
17	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure		administrator’s guide
			and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
		❑ Reboot the server so Windows recognizes the LUNs.	Windows documentation
		Now the LUNs in the Storage Group look like any other disks in the server.
		❑ Checkpoint - Use one of the following ways to verify that PowerPath sees	PowerPath product
		all the paths to the LUNs:	guide
		• PowerPath Administrator (Start > Programs > EMC > PowerPath
		Administrator)
		• PowerPath command
		powermt display dev=all class=clariion
		If PowerPath does not see the LUNs
		• Verify the server’s connection to the Storage Group.
		• Verify that you registered your PowerPath license key if you have one.
		• Verify that the storage-system properties are as defined in step 14.
18	Storage System	❑ If you will monitor storage-system events, use Navisphere Manger to apply	Navisphere Manager
	Configure Event	the desired event monitor templates to the storage system.	administrator’s guide
			and online help.
	Monitor	For a CX300, CX500, or CX700 storage system, go to step 21.
		For a CX500i storage system, continue to step 19.
19	CX500i Storage	❑ Use Navisphere Manager to configure CHAP on the storage system, but	Storage-system setup
	System	do not enable yet.	guide and Manager
	Configure		online help
	optional CHAP
	security

7-42

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems