EMC 69001166 manual Cable to, HBA connection s to, Any required zones.zones Checkpoint Use switch

NetWare Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
7	Server	❑ Cable the HBA ports to the switch	❑ Cable the HBA ports to the switch	Storage-system setup
	Cable to	connected to the storage system	connected to the storage system	guide.
		or to SP ports.	or to SP ports.
	switches or
	storage system	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify
		the HBA connection s to the	the storage-system connections
		switch by checking the LED(s) for	to the switch by checking the
		the switch port connected to each	LED(s) for the switch port
		HBA port.	connected to each HBA port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA port is logged in to the	HBA port is logged in to the
		switch port.	switch port.
		For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the
		following:	following:
		• The left LED is green and the	• The left LED is green and the
		right LED is off, which	right LED is off, which
		indicates that a 1-Gbit SP port	indicates that a 1-Gbit SP port
		is logged in to the switch port.	is logged in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.
8	Switches	For a SAN	For a SAN	Switch management
	Zone	❑ Zone the switches to provide a	❑ Zone the switches to provide a	documentation
		path from each HBA port (host	path from each HBA port (host
		initiator) to the appropriate SPs.	initiator) to the appropriate SPs.
		❑ If SAN Copy, MirrorView, or
		MIrrorView A is installed, create
		any required zones.zones.
		❑ Checkpoint - Use switch	❑ Checkpoint - Use switch
		management software to verify	management software to verify
		the switch connections to the	the switch connections to the
		storage system.	storage system

4-14

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems