EMC 69001166 manual CX300, CX400 For new HBAs For any HBAs, CX700,or

Solaris Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
5	Storage System	❑ If currently installed	❑ If currently installed	Navisphere Manager
	Update software	storage-system software is not at	storage-system software is not at	administrator’s guide
		the required minimum revision,	the required minimum revision,	and online help
		update it.	update it.
		CAUTION During the software	CAUTION During the software
		update, hosts connected to the	update, hosts connected to the
		storage system will lose access to	storage system will lose access to
		data if they do not have failover	data if they do not have failover
		software or if all paths to an SP	software or if all paths to an SP
		are down.	are down.
		For an FC4500 storage system, go to	For an FC4500 storage system, go to
		step 7.	step 7.
6	CX300, CX400,	For new HBAs	For any HBAs	Navisphere CLI
	CX500, CX600,	❑ Use the following Navisphere CLI	❑ Use the following Navisphere CLI	reference
	CX700,or	command to determine the	command to determine the
	FC4700-Series
		default storage-system type:	default storage-system type:
	Storage System
		navicli -h hostname systemtype	navicli -h hostname systemtype
	Set properties for
	PowerPath	where hostname is the IP	where hostname is the IP
		address or network name of an	address or network name of an
		SP in the storage system.	SP in the storage system.
		If the default storage-system	If the default storage-system
		system type is not 3 (CLARiiON	system type is not 3 (CLARiiON
		Open), use the following	Open), use the following
		Navisphere CLI command to set it	Navisphere CLI command to set it
		to 3:	to 3:
		navicli -h hostname systemtype	navicli -h hostname systemtype
		-config 3	-config 3
		CAUTION The above command	CAUTION The above command
		reboots both SPs at the same	reboots both SPs at the same
		time.	time.

5-34

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems