EMC 69001166 manual Zone for, Port host initiator to Appropriate SPs Checkpoint Use switch

AIX Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
11	Server	For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the
	Cable additional	following:	following:
	or replacement	• The left LED is green and the	• The left LED is green and the
	HBAs to switches	right LED is off, which indicates	right LED is off, which indicates
	or storage	that a 1-Gbit SP port is logged	that a 1-Gbit SP port is logged
	system (cont.)	in to the switch port.	in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.
12	Switches	For a SAN	For a SAN	Switch management
	Zone for	❑ Zone the switches to provide a	❑ Zone the switches to provide a	documentation
	additional HBAs	path from each additional HBA	path from each additional HBA
		port (host initiator) to the	port (host initiator) to the
		appropriate SPs.	appropriate SPs.
		❑ Checkpoint - Use switch	❑ Checkpoint - Use switch
		management software to verify	management software to verify
		the switch connections to the	the switch connections to the
		storage system.	storage system
13	Server	❑ Download the following command	❑ Download the following command	AIX documentation
	Make target SPs	from ftp://ftp.emc.com/pub/elab/	from ftp://ftp.emc.com/pub/elab/
		powerpath/aix and execute it:	powerpath/aix and execute it:
	available
		emc_cfgmgr.sh	emc_cfgmgr.sh
		❑ Checkpoint - Verify that AIX sees	❑ Checkpoint - Verify that AIX sees
		LUNZ devices with the following	LUNZ devices with the following
		AIX command:	AIX command:
		lscfg grep LUNZ	lscfg grep LUNZ
		If AIX does not see LUNZ devices	If AIX does not see LUNZ devices
		• Verify that arraycommpath is	• Verify that arraycommpath is
		set to 1 as described in step 9.	set to 1 as described in step 9.
		• Execute the following AIX	• Execute the following AIX
		command:	command:
		emc_cfgmgr.sh	emc_cfgmgr.sh

1-36

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems