EMC 69001166 manual Available

Linux Installation Checklist

Task		With Access Logix	Reference Document
13	Server	❑ If you did not reboot the server in step 12, reboot the server now.	Linux documentation
	Make target SPs	❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box	Navisphere Manager
	available	to verify that each HBA is registered with the storage system.	administrator’s guide
			and online help
		❑ Checkpoint - Make sure the /proc/scsi/scsi directory has entries for	Linux documentation
		LUNZs.
		Note: LUNZs are required to register the server HBAs with the storage
		system because LUNs have not be configured yet.
		❑ Checkpoint - Make sure the file for the HBAs, in the /proc/scsi directory,
		has entries for the expected targets (HBAs).
14	Storage System	❑ Use Navisphere Manager to set general storage-system properties.	Navisphere Manager
	Configure	❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create	administrator’s guide
			and online help
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
		❑ Reload the driver (if the driver is loaded as a module) or reboot the server	HBA documentation
		(if the driver is static to the kernel) so that Linux recognizes the LUNs.	(see URL on page 3-4)
		Now the LUNs in the Storage Group look like any other disks in the server.
		❑ Checkpoint - Make sure all LUNs have entries in the /proc/scsi/scsi	Linux documentation
		directory and in the file for the HBAs in the /proc/scsi directory.
		If any LUN entries are missing from the file, verify the zoning.
15	Server	❑ Make sure you have 128 sd and sg devices in the /dev directory.	PowerPath for Linux
	Prepare Server		installation guide
	for PowerPath	❑ Ensure that the PowerPath driver’s major numbers (232-239) are not
		already in use.

3-26

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems