EMC 69001166 Navisphere security, Not already defined and any additional users, Navisphere CLI

			AIX Installation Checklists
Task		With Access Logix	Reference Document
12	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if	Navisphere security
	Set up security	not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help
13	Storage System	❑ Use the following Navisphere CLI commands to set the storage system’s,	Navisphere CLI
	Set properties for	and array commpath properties:	reference
	PowerPath	navicli -h hostname systemtype -config 3
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the
		storage system.
		Note: Setting the array commpath property to 1 (enabled) creates LUNZ
		devices.
14	Server	❑ Cable any additional or replacement HBA ports to the switch connected to	Storage-system setup
	Cable additional	the storage system or to SP ports.	guide.
	or replacement	❑ Execute the following AIX command:	AIX documentation
	HBAs to switches	cfgmgr
	or storage
	system	❑ Checkpoint - For a SAN, verify the HBA connections to the switch by
		checking the LED(s) for the switch port connected to each additional HBA
		port.
		For a 1-Gbit switch - LED is green, which indicates that the HBA port is
		logged in to the switch port.
		For a 2-Gbit switch - One of the following:	Switch documentation
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
15	Switches	For a SAN	Switch management
	Zone	❑ Zone the switches to provide a path from each new HBA port (host	documentation
		initiator) to the appropriate SPs.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.

PowerPath Checklist — Existing AIX Server and New Storage System

1-25