EMC 69001166 manual PowerPath Configurations for NetWare

NetWare Installation Checklists

PowerPath Configurations for NetWare

Read this section if you are installing a NetWare PowerPath configuration with a new or existing server and a new or existing storage system. A new and existing server and a new and existing storage system are defined as follows:

new server - A server running NetWare and not connected to any storage system.

existing server - A server running NetWare and that is already connected to one or more storage systems.

new storage system - A CX300, CX500, or CX700 storage system that has the factory default settings and has never been connected to a server.

existing storage system - A CX200, CX300, CX400, CX500, CX600, CX700, FC4500, or FC4700-Series storage system that is already connected to one or more servers and is in a Navisphere domain.

All CLARiiON storage systems connected to the server must be CX200, CX300, CX400, CX500, CX600, CX700, FC4500, FC4700-Series, or FC5300 storage systems. If any other type of CLARiiON storage system is connected to the server, the server cannot run PowerPath.

Topics relating to the checklists for NetWare PowerPath configurations are

◆	Required Host Software Revisions	4-3
◆	Prerequisites	4-3

◆PowerPath Checklist — New NetWare Server and New Storage

System 4-7

◆PowerPath Checklist — New NetWare Server and Existing

Storage System 4-12

◆PowerPath Checklist — Existing NetWare Server and New

Storage System 4-21

◆PowerPath Checklist — Existing NetWare Server and Existing

Storage System 4-28

4-2

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems