EMC 69001166 manual System@SPipaddress

HP-UX Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
3	Server	❑ Edit the Navisphere Host Agent	❑ Edit the Navisphere Host Agent	CX-Series Server
	Install Host Agent	configuration file agent.config file	configuration file agent.config file	Software for HP-UX
	(cont.)	as follows:	as follows:	Installation Guide
		• Add the following entry if it	• Add the following entry if it
		does not already exist:	does not already exist:
		device auto auto	device auto auto
		• Add at least one privileged	• Add at least one privileged
		user.	user.
		• For FC4500 storage systems, if	• For FC4500 storage systems, if
		you know the IP addresses of	you know the IP addresses of
		the portal storage-system SPs,	the portal storage-system SPs,
		add an entry with the following	add an entry with the following
		format for each SP to the	format for each SP to the
		agent.config file:	agent.config file:
		system@SP_ip_address	system@SP_ip_address
		where SP_ip_address is the	where SP_ip_address is the
		address of the SP.	address of the SP.
		❑ Continue to edit the Navisphere	❑ Continue to edit other entries in
		Host Agent configuration file	the Navisphere Host Agent
		agent.config file as follows:	configuration file agent.config file
		• Comment the	as desired.
		OptionsSupported	For a CX300, CX500, CX700, or
		Autotrespass entry as follows:	FC4700-Series storage system, go to
		# OptionsSupported	step 5. For an FC4500 storage system,
			go to 6.
		Autotrespass
		The above entry will set the
		initiator type for the HBAs to no
		auto trespass when they
		register with the storage
		system:
		• Edit any other entries as
		desired.
4	Server	❑ If the server will be a SnapView	N/A	CX-Series Server
	Install admsnap	production or secondary host,		Software for HP-UX
		install the admsnap utility.		Installation Guide
		Go to step 7.

2-14

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems