EMC 69001166 manual DMP Configurations for Windows, Software Revisions

Windows Installation Checklists

DMP Configurations for Windows

Read this section if you are installing a Windows 2000 VERITAS DMP configuration with a new server and a new storage system. A new server and a new storage system are defined as follows:

new server - A server running Windows 2000 and not connected to any storage system.

new storage system - A CX300, CX500, or CX700 storage system that has factory default settings and has never been connected to a server.

Topics relating to the checklist for Windows DMP configurations are

◆

◆

◆

◆

Required Host Software Revisions	7-57
Prerequisites	7-58
Documentation	7-59
DMP Checklist — New Windows Server and New Storage
System	7-60

Required Host	This section lists the required software revisions for Windows 2000
Software Revisions	configurations.
	◆ Windows 2000 operating system revision and any service pack
		listed in the EMC Support Matrix on the Powerlink website
		(http://powerlink.emc.com)
	◆ HBA driver revision listed in the EMC Support Matrix on the
		Powerlink website (http://powerlink.emc.com)
	◆ VxVM 3.1 for Windows 2000 with HotFix01 or higher
		Refer to the EMC Support Matrix and the EMC PowerPath for Windows
		administrator’s guide on the Powerlink website
		(http://powerlink.emc.com) for the specific revision required for your
		Windows 2000 version.

DMP Configurations for Windows

7-57