EMC 69001166 manual Not registered, the load balancing

				HP-UX Installation Checklist
Task		With Access Logix	Without Access Logix		Reference Document
13	Server	❑ If PowerPath can see all the path	❑ If PowerPath can see all the path		PowerPath product
	Configure	to the LUNs, save the PowerPath	to the LUNs, save the PowerPath		guide
		configuration with the following	configuration with the following
	PowerPath
		command:	command:
	devices (cont.)
		powermt save	powermt save
		The PowerPath configuration is	The PowerPath configuration is
		saved in the following file:	saved in the following file:
		/etc/powermt.custom	/etc/powermt.custom
14	Server	If you have a PowerPath license key	If you have a PowerPath license key
	Test PowerPath	Note If your PowerPath license key is	Note If your PowerPath license key is
	with a license	not registered, the load balancing	not registered, the load balancing
	key	policy is restricted to basic failover.	policy is restricted to basic failover.
		❑ Stop all applications accessing	❑ Stop all applications accessing
		the storage system and disable	the storage system and disable
		user logins to the server.	user logins to the server.
		❑ View the LUNs available to the	❑ View the LUNs available to the		PowerPath product
		server using the following	server using the following		guide
		PowerPath command:	PowerPath command:
		❑ powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		❑ Choose one available LUN to	❑ Choose one available LUN to
		receive I/O for the test.	receive I/O for the test.
		❑ View the paths to the chosen LUN	❑ View the paths to the chosen LUN
		using the following PowerPath	using the following PowerPath
		command:	command:
		powermt display dev=x every=2	powermt display dev=x every=2
		where x is a device that	where x is a device that
		represents the chosen LUN.	represents the chosen LUN
		❑ Start I/O to the LUN.	❑ Start I/O to the LUN.
		❑ Identify the HBA sending I/O to	❑ Identify the HBA sending I/O to
		LUN by viewing the output of the	LUN by viewing the output of the
		powermt display dev=x every=2	powermt display dev=x every=2
		command, and disconnect the	command, and disconnect the
		cable to that HBA.	cable to that HBA.

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

2-43