EMC 69001166 manual Server direct, Attach only, Server With a, Iscsi Hba, Initiator ports

Windows Installation Checklists

Task		With Access Logix		Without Access Logix		Reference Document
16	Server (direct	❑ For a direct attach configuration,		❑ For a direct attach configuration,		Storage-system setup
	attach only)	cable any additional HBA ports to		cable any additional HBA ports to		guide
	Cable additional	SP ports.		SP ports.
	paths	❑ Checkpoint - Use one of the		❑ Checkpoint - Use one of the		PowerPath product
		following ways to verify that		following ways to verify that		guide
		PowerPath sees all the paths to		PowerPath sees all the paths to
		the LUNs:		the LUNs:
		•	PowerPath Administrator	•	PowerPath Administrator
			(Start > Programs > EMC >		(Start > Programs > EMC >
			PowerPath Administrator)		PowerPath Administrator)
		•	PowerPath command	•	PowerPath command
			powermt display dev=all		powermt display dev=all
			class=clariion		class=clariion
		If PowerPath does not see the		If PowerPath does not see the
		LUNs		LUNs
		• Verify the server’s connection		• Verify that you registered your
			to the Storage Group.		PowerPath license key if you
		• Verify that you registered your			have one.
			PowerPath license key if you	• Verify that the storage-system
			have one.		properties are as defined in
		• Verify that the storage-system			step 13.
			properties are as defined in
			step 13.
		For an FC4500 storage system		For an FC4500 storage system		Storage-system setup
		❑ Disconnect the computer from		❑ Disconnect the computer from		guide
		the serial port on the storage		the serial port on the storage
		system.		system.
17	Server	❑ Install the Navisphere Host Agent		❑ Install the Navisphere Host Agent		CX-Series Server
	Install Host	or Navisphere Server Utility and		or Server Utility and the		Software for Windows
		the Navisphere CLI.		Navisphere CLI.		installation guide or
	Agent or Server
						Navisphere Host Agent
	Utility
						and CLI for Windows
						installation guide
18	Server With a	❑ Download and install QLogic		N/A		Storage-system setup
	CX500i Storage	SANsurfer.				guide
	System	❑ Use QLogic SANsurfer to
	Configure server
	iSCSI HBA	configure the network parameters
		for each or for each HBA.
	initiator ports

PowerPath Checklist — New Windows Server and Existing Storage System With Boot Disk

7-33