EMC 69001166 manual Failover mode to Config Navicli -h hostname, Failovermode Navicli -h hostname

				AIX Installation Checklists
Task		With Access Logix	Without Access Logix	Reference Document
8	Storage System	❑ Use Navisphere Manager’s	❑ Use Navisphere Manager’s	Navisphere Manager
	Set properties for	Failover Setup Wizard (selected	Failover Setup Wizard (selected	administrator’s guide
		from the Tools menu on the	from the Tools menu on the	and online help
	PowerPath
		toolbar) to set the initiator type,	toolbar) to set the initiator type,	or
		failover mode, and array	failover mode, and array	Navisphere CLI
		commpath properties for the	commpath properties for the	reference
		server’s HBA ports (initiators):	server’s HBA ports (initiators):
		Initiator Type to CLARiiON Open	navicli -h hostname systemtype
		Failover mode to 1	-config 3
			navicli -h hostname
		Array commpath to Enabled
			failovermode 1
		Note: Setting the array
			navicli -h hostname
		commpath property to 1
			arraycommpath 1
		(enabled) creates LUNZ devices.
			where hostname is the IP
			address or network name of an
			SP in the storage system.
			Note: Setting the array
			commpath property to 1
			(enabled) creates LUNZ devices.

PowerPath Checklist — New AIX Server and Existing Storage System

1-15