Digital Audio Input: Configuration: Two-channel stereo per AES3 standard via CS8420 Digital Audio Transceiver with 24-bit resolution. Software selection of stereo, mono from left, mono from right or mono from sum. Automatically accepts sample rates between 24 kHz and 96 kHz.
Connector: EMI-suppressed RJ-45 female pinned according to StudioHub+→ standards. Transformer isolated, balanced, and floating according to AES3 standard.
Digital Audio Output: Stereo per AES3 standard. Digital Output sample rate software selectable for internal 48kHz, synchronize to AES input, or synchronize to auxiliary AES sync input (per AES-11 / DARS).
Connector: EMI-suppressed RJ-45 female according to StudioHub+→ standards. Transformer isolated, balanced, and floating according to AES3 standard.
Digital Output Level: -22.0 to 0.0 dBFS peak, software adjustable in 0.1dB steps.
Digital Sync Input: Output sample rate can be synchronized to the signal present on the AES/EBU input or to the AES3 signal applied to the Ext. Sync connector.
External Sync Range: Accepts 32kHz to 96 kHz for synchronization of the Digital Output signal to an external reference. Automatically accepts sample rates between 32kHz and 96kHz.
Connector: EMI-suppressed RJ-45 female pinned according to StudioHub+→ standards, Transformer isolated, balanced, and floating according to AES3 standard.
Remote Control: 10/100BaseT Ethernet: standard web-based protocol and additional TCP/IP connections.
Direct Serial: RS-232 at 9,600, 19,200, or 57,600 baud (no handshaking); Hayes command set compatible external modem.
Connectors: RS-232 port - EMI-suppressed DB-9 female connector. Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface: Configuration: Four fully optoisolated inputs.
Software sensing of both 'go-high' and 'go-low' transitions. Inputs are protected to 2000 V AC/DC.
Connector: EMI suppressed DB-9 male.
Control: User-programmable using built-in Trigger Script feature in included OmniaONE Remote Control software. Virtually any parameter of the OmniaONE may be programmed through this interface feature.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
50
