New Media Technology Omnia ONE Multicast Rear Panel Connections, Analog Audio Inputs and Outputs

Rear Panel Connections

Analog Audio Inputs and Outputs

Balanced XLR-type connectors are used as input connectors for the analog audio. Both analog and digital input sources may be connected simultaneously, however, only the input source that has been selected is active. Analog/Digital/Livewire Input source selection is done through the “Source” software parameter setting in the Input/Output / Input Menu.

The stereo analog inputs are designed for standard +4dBu balanced signals. Pin 2 is Hot.

Individual Left and Right analog outputs are available on two male XLR jacks. Pin 2 is Hot.

A Note About Relative Phase:

If the relative phase of your installation (including the OmniaONE) differs from that of your existing system, your announcers may feel that they sound “weird” in their headphones. If this occurs, then the relative phase of the processor is 180 degrees from what your air talent is used to. To remedy this, you can either reverse the polarity of both of the analog inputs or simply change the Invert setting to [Both] in the Input submenu of the Input/Output menu.

OmniaONE Multicast - Use and Operation Manual – Version 0.90

18