EMC 69001166 manual For a SAN, For a 2-Gigabit switch One of the following

			Solaris Installation Checklists
Task		With Access Logix		Reference Document
6	Switches	For a SAN		Rails, cabinet, switch
	Install	❑ Install switches, if not already installed.		documentation.
		❑ Connect a cable from each host HBA port to a switch port.
		❑ Checkpoint - Verify the HBA connection to the switch by checking the
		LED(s) for the switch port connected to the HBA port.
		For a 1-Gbit switch - LED is green, which indicates that the HBA is
		logged in to the switch port.
		For a 2-Gigabit switch - One of the following:
		• The left LED is green and the right LED is off, which indicates that a
		1-Gbit SP port is logged in to the switch port.
		• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
7	Storage System	❑ Install the storage system in the cabinet, if not already installed.		Rails and cabinet
	Install			documentation
8	Storage System	❑ Install the Navisphere Initialization Utility on a host on the same subnet as		Storage-system setup
	Initialize and	the storage-system management ports.		guide
	install software	❑ Use the Navisphere Initialization Utility to initialize the storage system.
	enablers
		❑ If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A		Navisphere Manager
		software, install their enablers.		administrator’s guide
				and online help

PowerPath Checklist — New Solaris Server and New Storage System

5-9