EMC 69001166 manual Make LUNs, Scan for disks

				Windows Installation Checklists
Task		With Access Logix	Without Access Logix		Reference Document
16	Server	❑ Use Navisphere Manager to	N/A		Navisphere Manager
	Make LUNs	disconnect and then reconnect			administrator’s guide
		the server and its Storage Group.			and online help
	available to
	additional HBAs	❑ Restart the Host Agent, then use			Windows documentation
		the Disk Management tool to
		scan for disks.
		For an FC4500 storage system	For an FC4500 storage system		Storage-system setup
		❑ Disconnect the computer from	❑ Disconnect the computer from		guide
		the serial port on the storage	the serial port on the storage
		system.	system.
17	Server	If you have a PowerPath license key	If you have a PowerPath license key		PowerPath product
	Test PowerPath	If your PowerPath license key is not	If your PowerPath license key is not		guide
	with a license	registered, the load balancing policy is	registered, the load balancing policy is
	key	restricted to basic failover.	restricted to basic failover.
		❑ View the LUNs available to the	❑ View the LUNs available to the
		server using the following	server using the following
		PowerPath command:	PowerPath command:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		❑ Choose one available LUN to	❑ Choose one available LUN to
		receive I/O for the test.	receive I/O for the test.
		❑ View the paths to the chosen	❑ View the paths to the chosen
		LUN using the following	LUN using the following
		PowerPath command:	PowerPath command:
		powermt display dev=x every=2	powermt display dev=x every=2
		where x is a pseudo device that	where x is a pseudo device that
		represents the chosen LUN.	represents the chosen LUN.
		❑ Start I/O to the LUN.	❑ Start I/O to the LUN.
		❑ Identify the HBA sending I/O to	❑ Identify the HBA sending I/O to
		LUN by viewing the output of the	LUN by viewing the output of the
		powermt display dev=x every=2	powermt display dev=x every=2
		command, and disconnect the	command, and disconnect the
		cable to that HBA.	cable to that HBA.

PowerPath Checklist — Existing Windows Server and Existing Storage System

7-55