EMC 69001166 manual Into cluster

NetWare Installation Checklists

Task		With Access Logix	Reference Document
16	Storage System	❑ Plan your monitoring configuration.	Navisphere Manager
	Set up Event	❑ Use Navisphere Manager to set user options, create templates, and set up	administrator’s guide
			and online help
	Monitor
		your monitoring configuration.
17	Server	If the server is in a cluster	NetWare documentation
	Move server back	❑ Load cluster software on the server with the following NetWare command:
	into cluster	ldncs
		❑ Move cluster resources back to the server.
18	Server	❑ Create partitions or the pertinent database file systems on the LUNs.	Host connectivity guide
	Make LUNs	If NetWare does not recognize any LUNs, verify the connection to the	or NetWare
			documentation
	available to	Storage Group.
	NetWare
19	Server	❑ Save the server’s PowerPath configuration with the following PowerPath	PowerPath product
	Save PowerPath	command:	guide
	configuration	powermt -save
		This command creates the powermt.ctm configuration file.
20	Server	If you have a PowerPath license key	NetWare documentation
	Test PowerPath	If your PowerPath license key is not registered, the load balancing policy is
	with a license key	restricted to basic failover.
		❑ View the LUNs available to the server using the PowerPath command	PowerPath product
		powermt display dev=all class=clariion	guide
		❑ Choose one available LUN to receive I/O for the test.
		❑ View the paths to the chosen LUN using the following PowerPath
		command:
		powermt display dev=x every=2
		where x is a pseudo device that represents the chosen LUN.
		❑ Start I/O to the LUN.
		❑ Identify the HBA sending I/O to LUN by viewing the output of the powermt
		display dev=x every=2 command, and disconnect the cable to that HBA.

4-26

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems