EMC 69001166 manual Reinstall HBA driver HBA documentation, Values required for CLARiiON

					Windows Installation Checklists
Task		With Access Logix		Without Access Logix		Reference Document
12	Server	❑	Reinstall HBA driver.	❑ Reinstall HBA driver.		HBA documentation
	Set HBA driver					(see URL on 7-5)
	properties	❑ Set the HBA driver parameters to		❑ Set the HBA driver parameters to
			the values required for	the values required for
			CLARiiON.	CLARiiON.
			CAUTION Using improper	CAUTION Using improper
			settings can cause erratic failover	settings can cause erratic failover
			behavior, such as greatly	behavior, such as greatly
			increased I/O delays.	increased I/O delays.
13	Storage System	For a CX-Series or FC4700-Series		For a CX-Series or FC4700-Series		Navisphere Manager
	Set properties for	storage system		storage system		administrator’s guide
	PowerPath	❑	Use Navisphere Manager’s	❑ Use the following Navisphere CLI		and online help or
						Navisphere CLI
			Failover Setup Wizard (selected	command to determine the		reference
			from the Tools menu on the	default storage-system type:
			toolbar) to set the following	navicli -h hostname systemtype
			storage-system properties for the
				where hostname is the IP
			server’s HBA ports (initiators):
			Initiator Type to CLARiiON Open	address or network name of an
				SP in the storage system.
			Failover mode to 1
				If the default storage-system
			Array commpath to Enabled
				system type is not 3 (CLARiiON
				Open), use the following
				Navisphere CLI command to set
				it to 3:
				navicli -h hostname systemtype
				-config 3
				CAUTION The above command
				reboots both SPs at the same
				time.
				❑ Use the following Navisphere CLI		Navisphere CLI
				commands to set the default		reference
				failover mode and array
				commpath properties to the
				values for PowerPath:
				navicli -h hostname
				failovermode 1
				navicli -h hostname
				arraycommpath 1
				where hostname is the IP
				address or network name of an
				SP in the storage system.

PowerPath Checklist — New Windows Server and Existing Storage System With Boot Disk

7-29