EMC 69001166 manual With Access Logix Reference Document Switches, Bind Boot LUN

				Tru64 UNIX Installation Checklist
Task		With Access Logix		Reference Document
3	Switches	❑ Zone the switches to provide a single path from one		Switch management documentation
	Zone single path to	HBA (host initiator) to default SP owner of the boot disk
	SP	LUN in the storage system.
		Do note zone more than one path to the storage system
		at this point in the installation procedure. The
		installation my fail if both SPs are visible to Tru64 UNIX.
		You can zone multiple paths later in the installation
		procedure.
		❑ Checkpoint — Verify that the HBA connection is visible.		Host connectivity guide for Tru64 UNIX
		If it is not visible, execute the init command at the		and Tru64 UNIX documentation
		server’s console.
4	Storage System	❑ Determine the port name and node name of each HBA		Host connectivity guide for Tru64 UNIX
	Set connection	connected to the storage system.
	properties	❑ Use Navisphere Manager to register the connection for		Navisphere Manager administrator’s
		each HBA with the following Initiator Record properties:		guide and online help
		Property	Value
		Initiator Type	Compaq/Tru64
		ArrayCommPath	Selected
		Failover Mode	0
		Unit Serial Number	Array
5	Storage System	CAUTION The RAID Group for the boot LUN must consist of		Navisphere Manager administrator’s
	Bind Boot LUN	Fibre Channel disks (not ATA disks).		guide and online help
		❑ Use Navisphere Manager to create a RAID Group for
		the LUN that will be the system disk and bind that LUN.
		❑ Create a Storage Group for the boot LUN.
		❑ After the binding of the boot LUN is completed, use
		Navisphere Manager to connect the server to its
		Storage Group.

Checklist - New Tru64 UNIX Server and New Storage System With Boot Disk

6-7