EMC 69001166 manual Lan, Storage system Server, System or to SP ports Guide

NetWare Installation Checklists

Task		With Access Logix	Reference Document
9	Storage System	For a 2-Gbit switch - One of the following:
	Cable to switch	• The left LED is green and the right LED is off, which indicates that a
	or server and	1-Gbit SP port is logged in to the switch port.
	LAN (cont.)	• For a DS-xxB2 switch, both LEDs are green, which indicates that a
		2-Gbit HBA port is logged in to the switch port.
		• For a DS-xxM2 switch, the left LED is blue and the right LED is off,
		which indicates that a 2-Gbit HBA port is logged in to the switch port.
		❑ Cable each SP to the LAN connected to the hosts from which you will	Storage-system setup
		manage the storage system.	guide.
10	Storage System	❑ Use Navisphere Manager to define a global administrator and domain (if	Navisphere security
	Set up security	not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help
11	Storage System	❑ Use the following Navisphere CLI commands to set the following default	Navisphere CLI
	Set Properties for	storage-system properties:	reference
	PowerPath	navicli -h hostname systemtype -config 3
		navicli -h hostname failovermode 1
		navicli -h hostname arraycommpath 1
		where hostname is the IP address or network name of an SP in the
		storage system.
12	Server	❑ Cable any additional HBA ports to the switch connected to the storage	Storage-system setup
	Cable additional	system or to SP ports.	guide
	HBAs to switches	❑ Checkpoint - For a SAN, verify the HBA connections to the switch by
	or storage	checking the LED(s) for the switch port connected to each additional HBA
	system
		port.
		For a 1-Gbit switch - LED is green, which indicates that the HBA port is
		logged in to the switch port.

For a 2-Gbit switch - One of the following:

•The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port.

•For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port.

•For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port.

4-24

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems