EMC 69001166 Navicli -np -d device Failovermode Arraycommpath, Example, com1 Server, Website

						HP-UX Installation Checklist
Task		With Access Logix		Without Access Logix			Reference Document
8	FC4500 Storage	From a serially connected laptop					Storage-system setup
	System	❑ Use the following Navisphere CLI					guide and Navisphere
	Set properties for						CLI reference
			commands to set the following
	PowerPath
			default storage-system properties:
	(cont.)
			navicli -np -d device
			failovermode 1
			navicli -np -d device
			arraycommpath 1
			where device is the name of the
			computer port connected to the
			storage-system serial port (for
			example, com1).
9	Server	❑ Insert the PowerPath installation		❑	Insert the PowerPath installation		PowerPath Release
	Install PowerPath		CD and mount it.		CD and mount it.		Notes and PowerPath
							for UNIX installation
		❑	Install PowerPath.	❑	Install PowerPath.
							and administrator’s
		❑	Register PowerPath.	❑	Register PowerPath.		guide
		❑ Install any PowerPath patches		❑ Install any PowerPath patches
			from the Software downloads		from the Software downloads
			page on the EMC Powerlink		page on the EMC Powerlink
			website:		website:
			http://powerlink.emc.com		http://powerlink.emc.com
		❑ Execute the following PowerPath		❑ Execute the following PowerPath			PowerPath product
			command:		command:		guide
			powermt config		powermt config

PowerPath Checklist - Existing HP-UX Server and Existing Storage System

2-39