EMC 69001166 manual Use the following Power Path Use the following PowerPath

Solaris Installation Checklists

Task		With Access Logix	Without Access Logix	Reference Document
13	Server	❑ Use the following Power Path	❑ Use the following PowerPath	PowerPath product
	Configure	commands to configure	commands to configure	guide
		PowerPath for any missing logical	PowerPath for any missing logical
	PowerPath for
		devices so all paths to the LUNs	devices so all paths to the LUNs
	missing devices
		are visible:	are visible:
		powercf -i or powercf -q	powercf -i or powercf -q
		powermt config	powermt config
		❑ Checkpoint - Use the following	❑ Checkpoint - Use the following
		PowerPath command to verify	PowerPath command to verify
		that PowerPath sees all paths to	that PowerPath sees all paths to
		the LUNs:	the LUNs:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		If PowerPath cannot see all the	If PowerPath cannot see all the
		paths, verify that	paths, verify that
		• You registered your PowerPath	• You registered your PowerPath
		license key.	license key.
		• The storage-system properties	• The storage-system properties
		are set as defined in steps 6 or	are set as defined in step 6 or
		7.	7.
		For an FC4500 storage system	For an FC4500 storage system	Storage-system setup
		❑ Disconnect the computer from the	❑ Disconnect the computer from the	guide
		serial port on the storage system.	serial port on the storage system.
14	Server	If you have a PowerPath license key	If you have a PowerPath license key	PowerPath product
	Test PowerPath	Note If your PowerPath license key is	Note If your PowerPath license key is	guide
	with a license	not registered, the load balancing	not registered, the load balancing
	key	policy is restricted to basic failover.	policy is restricted to basic failover.
		❑ Stop all applications accessing	❑ Stop all applications accessing
		the storage system and disable	the storage system and disable
		user logins to the server.	user logins to the server.
		❑ View the LUNs available to the	❑ View the LUNs available to the
		server using the following	server using the following
		PowerPath command:	PowerPath command:
		powermt display dev=all	powermt display dev=all
		class=clariion	class=clariion
		❑ Choose one available LUN to	❑ Choose one available LUN to
		receive I/O for the test.	receive I/O for the test.

5-42

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems