EMC 69001166 manual Reboots both SPs at the same Servername is the name

Windows Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
13 Storage System	For an FC4500 storage system	For an FC4500 storage system	Storage-system setup
Set properties for	❑ Connect a computer to the serial	❑ Connect a computer to the serial	guide
PowerPath	port on the storage system.	port on the storage system
(cont.)
	❑ From the computer connected to	❑ From the computer connected to	Navisphere CLI
	the storage system’s serial port,	the storage system’s serial port,	reference
	use the following Navisphere CLI	use the following Navisphere CLI
	commands to set the following	command to determine the
	storage-system properties for the	default storage-system type:
	server’s HBA ports (initiators):	navicli -np -d device
	navicli -np -d device	systemtype
	storagegroup -sethost -host	where device is the name of the
	servername -type 3
		computer port connected to the
	navicli -np -d device
		storage-system serial port (for
	storagegroup -sethost -host	example, com1).
	servername -failovermode 1	If the default storage-system
	navicli -np -d device	system type is not 3 (CLARiiON
	storagegroup -sethost -host	Open), use the following
	servername -arraycommpath 1	Navisphere CLI command to set
	where	it to 3:
		navicli -np -d device
	device is the name of the
		systemtype -config 3
	computer port connected to the
	storage-system serial port (for	CAUTION The above command
	example, com1).	reboots both SPs at the same
	servername is the name of the	time.
	server with the HBAs.
		For an FC4500 storage system	Navisphere CLI
		❑ From the computer connected to	reference
		the storage system’s serial port,
		use the following Navisphere CLI
		commands to set the following
		default storage-system
		properties:
		navicli -np -d device
		failovermode 1
		navicli -np -d device
		arraycommpath 1
		where device is the name of the
		computer port connected to the
		storage-system serial port (for
		example, com1).

7-30

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems