EMC 69001166 manual Zone additional

			NetWare Installation Checklists
Task		With Access Logix		Reference Document
13	Switches	For a SAN		Switch management
	Zone additional	❑ Zone the switches to provide a path from each additional HBA port (host		documentation
	HBAs	initiator) to the SPs.
		❑ If SAN Copy, MirrorView, or MirrorView/A is installed, create any required
		zones.
		❑ Checkpoint - Use switch management software to verify the switch
		connections to the storage system.
14	Server	❑ Scan for LUNs with the following NetWare command:		NetWare documentation
	Make target SPs	scan all luns
	available
		❑ Checkpoint - Verify that each path has a LUNZ with the following
		NetWare command:
		list devices
		❑ Restart Navisphere Agent or run Navisphere Server Utility.		CX-Series Server
		❑ Checkpoint - Use Navisphere Manager’s Connectivity Status dialog box		Software for NetWare
				Installation Guide
		to verify that each HBA is registered with the storage system.		Navisphere Manager
				administrator’s guide
				and online help
15	Storage System	❑ Use Navisphere Manager to set general storage-system properties.		Navisphere Manager
	Configure			administrator’s guide
				and online help
		❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create
		Storage Groups, and assign LUNs to Storage Groups.
		❑ Use Navisphere Manager to connect the server to a Storage Group
		❑ Reboot the server.
		❑ Checkpoint - Verify that PowerPath sees all the paths to the LUNs using		PowerPath product
		the following PowerPath command:		guide
		powermt display dev=all class=clariion
		If PowerPath does not see the LUNs
		• Verify the server’s connection to the Storage Group.
		• Verify that you registered your PowerPath license key if you have one.
		• Verify that the storage-system properties are as defined in step 11.

PowerPath Checklist — Existing NetWare Server and New Storage System

4-25