EMC 69001166 manual To the agent.config file, Where SPipaddress is the address of the SP

HP-UX Installation Checklist

Task		With Access Logix	Reference Document
5	Server	❑ Install the Navisphere Host Agent.	CX-Series Server
	Install Host	❑ Modify user login scripts.	Software for HP-UX
			Installation Guide
	Agent
		❑ Edit the Navisphere Host Agent configuration file agent.config file as
		follows:
		• Add the following entry if it does not already exist:
		device auto auto
		• Add at least one privileged user.
		• For FC4500 storage systems, if you know the IP addresses of the portal
		storage-system SPs, add an entry with the following format for each SP
		to the agent.config file:
		system@SP_ip_address
		where SP_ip_address is the address of the SP.
		❑ Continue to edit the Navisphere Host Agent configuration file agent.config
		file as follows:
		• Comment out or comment the OptionsSupported Autotrespass entry
		as follows:
		No auto trespass
		(for HP-UX without PV Links)
		# OptionsSupported Autotrespass
		The above entry will set the initiator type for the HBAs to no auto
		trespass when Host Agent is restarted later in this procedure.
		Auto trespass
		(for HP-UX with PVLinks)
		OptionsSupported Autotrespass
		The above entry will set the initiator type for the HBAs to auto trespass
		when Host Agent is restarted later in this procedure.
		• Edit any other entries as desired.
6	Storage System	❑ For Navisphere 6.X, use Navisphere Manager to define a global	Navisphere security
	Set up security	administrator and domain (if not already defined) and any additional users.	administrator’s guide
			and Navisphere
			Manager online help

2-56

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems