Brocade Communications Systems IP250 user manual SFlow, Deleting a port from port mirroring

22 sFlow

3.In the Monitored Ports pane, click Edit. Select a port from the list to edit the monitor port.

NOTE

An error message is displayed if the monitored port is being mirrored by some other mirror port.

4.Select Mode from the list based on whether to monitor inbound traffic, outbound traffic, or both.

Deleting a port from port mirroring

To delete mirror ports in a device, perform the following steps.

1.Select Configure > Port Mirroring.

The Port Mirroring dialog box is displayed.

2.Select a port in the Mirror Ports pane.

3.In the Monitored Ports pane, click Delete. Select a port from the list to delete the monitor port.

sFlow

The IP Element Manager supports sFlow to capture traffic data and configure sFlow collector.

Configuring sFlow in Element Manager

1.Click the Configure icon in the Element Manager toolbar..

2.Select sFlow (as shown in Figure 280). or

To access the sFlow from Element Manager, right-click a module (or modules), trunk (or trunks), or port (or ports) and select sFlow.

FIGURE 280 sFlow dialog box

3. To configure sFlow, refer to “Configuring sFlow” on page 1020.

740	Brocade Network Advisor IP User Manual
	53-1003056-01