Brocade Communications Systems IP250 user manual 797

Monitoring configurations 25

5. Click the CLI Command tab and complete the following steps.

FIGURE 310 CLI Template dialog box - CLI Commands tab

d.Enter the show commands in the CLI Commands text area.

NOTE

Only commands listed in the cliShowCommands.properties file can be entered for a monitoring configuration. For more information, refer to “Configuration error checking” on page 793.

For a list of guidelines to use when entering CLI commands, refer to “CLI command guidelines” on page 787.

Add commands from the CLI templates or examples by selecting one or more commands from the CLI Templates or Examples of CLI Commands folder and clicking the right arrow button. For more information, refer to “CLI Templates” on page 1339.

e.To enter a parameter for a CLI command, select the parameter type from the CLI Commands list - Parameters folder and click the right arrow to move the parameter type to the CLI Commands text area.

Parameters use the following format: $<namedata_type>, where name is the parameter and data_type is the type of parameter.

Parameter types include integer ($<nameINTEGER>), string ($<nameSTRING>), slot/port ($<nameSLOT_PORT>), MAC address ($<nameMAC>), and IP address ($<nameIP_ADDRESS>).

Brocade Network Advisor IP User Manual	797
53-1003056-01