25 Product configuration templates

c.To enter a parameter for a CLI command, select the parameter type from the CLI Commands list - Parameters folder and click the right arrow to move the parameter type to the CLI Commands text area.

Parameters use the following format: $<namedata_type>, where name is the parameter and data_type is the type of parameter.

Parameter types include integer ($<nameINTEGER>), string ($<nameSTRING>), slot/port ($<nameSLOT_PORT>), MAC address ($<nameMAC>), and IP address ($<nameIP_ADDRESS>).

d.Edit the parameter by entering the variable or character string you want to use for the parameter in place of the name variable.

NOTE

Each parameter must be unique. The Management application does not check for duplicate parameters.

access list 400 deny $<ipIP_ADDRESS>

In the example, access list 400 deny is the CLI command, ip is the parameter variable and IP_ADDRESS is the parameter type.

e.(Optional) Select a template from the CLI Templates folder and click the right arrow to include it in the configuration.

This allows you to deploy more than one template to a device in a single deployment. Only templates defined in the Management application display. The list and button only display when there is at least one user-defined CLI template.

6.Click the Parameters tab and complete the following steps.

FIGURE 305 CLI Template dialog box - Parameters tab

a.Select the Always prompt for parameter review/edit during manual deployment check box to display the Parameter tab in the Prompt dialog box during manual deployment.

Clear to not display the Parameter tab in the Prompt dialog box during manual deployment. If this check box is clear and you do not fill in all parameter values, the Prompt dialog box displays.

When selected, the Parameter tab displays in the Prompt dialog box during manual deployment even if you filled in all parameter values on the Parameters tab of the CLI Template dialog box.

b.Select one of the following options from the Mode list for the parameter import mode.

Same Values for each Target — Select to set the same values for all selected targets.

Different Values for each Target — Select to set individual values for the selected targets.

782

Brocade Network Advisor IP User Manual

 

53-1003056-01

Page 834
Image 834
Brocade Communications Systems IP250 user manual CLI Template dialog box Parameters tab