Brocade Communications Systems IP250 user manual Scheduling a PBR policy deployment

Policy-based routing 17

7.Select one or more of the following to capture snapshots:

•Select the Pre-deploymentcheck box to capture a snapshot of the product’s configuration prior to deployment of the security configuration.

•Select the Post-deploymentcheck box to capture a snapshot of the product’s configuration after deployment of the security configuration.

If you select the Post-deploymentcheck box, enter the amount of time (between 1 and 300 seconds) you want the application to wait before capturing the snapshot in the Delay field.

8.Select one or more products to which you want to deploy the configuration in the Available Targets list and click the right arrow button to move them to the Selected Targets list.

9.Click OK on the Deploy to Products - PBR dialog box.

Scheduling a PBR policy deployment

To schedule a PBR policy deployment, complete the following steps.

1.Select Schedule.

2.Select one of the following save configuration options:

•Save to running — Select to update the running configuration; however, the deployment is not saved to the product’s flash memory.

•Save to running and startup — Select to update the running configuration as well as save the deployment configuration to the product’s flash memory. Selecting this option is the equivalent to a write memory command on the product CLI.

•Save to running and startup then reboot — Select to update the running configuration, save the deployment configuration to the product’s flash memory, and reboot the product. Selecting this option is the equivalent to entering a write memory and a reload command on the product CLI.

3.Enter a name for the deployment in the Name field.

4.Enter a description for the deployment in the Description field.

5.Click the Schedule Enable check box and click the ellipsis button to schedule deployment. The Schedule Properties dialog box displays.

6.Choose one of the following options to configure the frequency at which deployment runs for the schedule:

•To configure deployment to run only once, refer to “Configuring a one-time deployment schedule” on page 556.

•To configure hourly deployment, refer to “Configuring an hourly deployment schedule” on page 556.

•To configure daily deployment, refer to “Configuring a daily deployment schedule” on page 557.

•To configure weekly deployment, refer to “Configuring a weekly deployment schedule” on page 557.

•To configure monthly deployment, refer to “Configuring a monthly deployment schedule” on page 557.

Brocade Network Advisor IP User Manual	555
53-1003056-01